Working hours：
Monday to Saturday：
8:00 - 12:00
Afternoon : 13:30 -17:30
Contact information：
Sales Hotline：
0757-28838775
134 1553 1049
Foreign trade sales：
13450588339
After sale Hotline：
0757-2923 1806
Fax：0757-28838775
Website：http://www.autowin.com.cn
domestic E-mail：atw@autowin.com.cn
abroad E-mail：autowin@autowin.com.cn
|
|
平绣头调节旋梭教程
flat head adjust rotary hook standard height of the chenille needle bar position shoulde be 3mm speace between needle bar and needle plate 毛巾针杆的标准高度应在与针板保持3mm的间距位置 第一行主标题 请输入要描述的内容进行内容补充，请输入要描述的内容进行内容补充  毛巾机头针嘴调回正常位置，针嘴不应与针板之间存在间隙，机头内部所指向的部件同样不应存在间隙 To adjust chenille nozzle back to normal position nozzle to plate must have no gap and the upper part which we point by finger also must no gap 调节毛巾大压脚回到正常位置，当主轴位置在100度时，大压脚应与针板保持2mm的间隙 adjust big pressure foot back to normal position, when main shaft in 100 degree big pressure foot to plate should be 2mm gap 第一种剪线刀无法正常出刀时的调节方法 to adjust the chenille trimmer back to normal when chenille kinfe could't come out 当毛巾主轴需要重新安装的时候 when chenille main shaft need to reinstall 主轴固定在135度 调节中间的凸轮（A凸轮）打表顺时针转动下降1度时锁紧抱箍螺丝。注意凸轮左右与轴承保持在中间。 main shaft set position in 135 degree,when need to adjust the middle cam (A cam). clockwise turn down 1 degree than lock the hoop screw. beware keeping the A cam left and right and main shaft in the middle. 主轴固定在138度 调节右边的凸轮（B凸轮）打表顺时针转动下降1度时锁紧抱箍螺丝。注意凸轮左右与轴承保持在中间不要擦到右边轴承。 main shaft set position in 138 degree, when need to adjust right side cam (B cam).clockwise turn down 1 degree than lock the hoop screw. beware keeping the B cam left and right and main shaft in the middel and do not touch with right side shaft. 主轴固定在155度 调节左边的凸轮（C凸轮）打表顺时针转读上调1度时，锁紧抱箍螺丝。 main shaft set position in 155 degree, when need to adjust left side cam (C cam).clockwise turn up 1 degree than lock the hoop screw. 第二种剪线刀无法正常出刀时的调节示范 adjustment Demonstrations when cutter knife could't come out normally 调节针杆高度至正常位置，针与旋梭之间的间距应保持在1.5mm adjust needle bar height back to normal position shoule be 1.5mm speace between needle to rotary hook 平绣压脚调回正常位置，压脚与针板之间的 间距应保持在0.2-0.5mm之间 flat pressure foot adjust back to right position, space between pressure foot and needle plate should be 0.2-0.5mm |
FOSHAN AUTOWIN COMPUTERIZED EMBROIDERY MACHINERY CO.,LTD.
ADD: NO.9 NORTH AREA,SHANGHUA INDUSTRIAL PARK,LECONG TOWN
SHUNDE DISTRICT,FOSHAN CITY,GUANGDONG PROVINCE.
Sales Hotline：0757-2883 8775/134 1553 1049
After sale Hotline：0757-2923 1806
Foreign trade sales：13450588339
Fax：0757-2883 8775
Website：http://www.autowin.com.cn
E-mail：atw@autowin.com.cn（国内 local market）
E-mail：autowin@autowin.com.cn（国外 foreidnal market）
HIGH QUALITY EMBRODERIY
COMES FORM AUTOWIN
HIGH SPEED HIGH EFFICIENT
TURLY TOTAL HIGH SPEED
now launch a brand new type (the third generation)
high speed machine,max speed 1300rpm,and stable
for 1200rpm long time working, acheive actual high
efficient,high accuracy and machine long last.